崗位職責：
Main Tasks：
1.建立穩定、專業的技術團隊，為公司戰略發展做好知識和人才準備;根據公司業務情況，將技術工作分配給各工程師，并監督實際實施；
Build up stable and professional engineering team, knowledge and talent preparation to fulfil company strategy development; distribution of engineering work to respective engineers according to company business status, and supervising the actual implementation;
2.負責詢價的可行性分析和成本計算，及時向銷售團隊提供準確的成本水平;不斷修改和開發成本計算工具，以提高計算的準確性和速度；
Responsible for feasibility analyze and cost calculation of RFQ’s, provide accurate cost level on time to sales team; continue to modify and develop cost calculation tool in order to improve calculation accuracy and speed;
3.負責APQP流程，領導項目工程師確保項目管理滿足客戶/新項目的需求，包括實物樣品和PPAP文件，確保新項目順利投產;在項目管理中不斷提高客戶滿意度；
In charge of APQP process, lead project engineering to ensure project management fulfil customer/new project demand, both physical sample and PPAP document, make sure new project successfully launch in production; continue to improve customer satisfaction in project management;
4.了解客戶的標準和規范，將其正確地轉換到各部件的技術文件中；
Understanding customer standards and specifications, transfer them correctly to engineering document of each part;
5.負責產品和工藝研發，制定和改善設備的技術規范。
Be responsible for product and process research and development, and formulate and improve technical specifications for equipment.
6.負責新設備驗收，支持設備采購。
Be responsible for the acceptance of new equipment and support equipment procurement.
7.制定并實施內部生產工藝技術文件，包括但不限于FEMA，控制計劃，流程圖等;領導技術工程師起草熱處理和表面處理的詳細工藝標準;如果標準有任何變化，確保及時更新；
Conduct and implement technical document for internal production process, including but not limited to FEMA, control plan, flow chart etc.; lead technology engineering to draft detail technological standard for heat treatment and surface treatment; ensure all standard update in time if there is any change;
8.在ERP系統中起草/維護產品BOM，維護ERP系統中BOM的標準成本;與財務一起調查是否發現STD費用的問題；
Draft/maintain BOM of product in ERP system, maintain STD cost of BOM in ERP system; investigate together with Finance if indicate anything wrong with STD cost;
9.負責冷成型和搓絲的工裝設計，持續提高工裝的使用壽命，優化工裝設計;與生產車間緊密合作，支持生產效率提高活動;通過模具設計工程在車間支持SMED活動;標準化冷成型和螺紋滾壓的工裝設計，準備培訓在此方面沒有類似經驗的工程師；
Responsible for tooling design of cold forming and thread rolling, continue to improve lift time of tooling and optimize tooling design; work closely with workshop and to support production efficiency improvement activities if anything need from technical perspective; Support SMED activity in the workshop by tooling design engineering; Standardize tooling design of cold forming and thread rolling, prepare to train no similar experience engineering for this area;
10.為客戶應用提供必要的支持，并為客戶提供專業的產品功能建議；
Provide support during customer application if necessary and offer professional suggestion on product function to customer if needed;
11.為生產部門和布爾頓批準的下級供應商提供技術支持，以確保布爾頓的成功；
Provide technical support to manufacturing department and sub-suppliers which approved by Bulten if necessary for Bulten’s success;
12.配合和支持銷售團隊進行業務發展，研究/調查客戶需求，并從技術角度努力滿足客戶需求；
Cooperate and support sales team to conduct business development, study/investigate customer demand and try to fulfil it from technical perspective;
13.與供應鏈部門合作，為新供應商的開發提供技術支持；
Cooperate with supply chain department to offer technical support on new supplier development;
14.及時將技術信息匯報給直接經理和其他部門，確保在業務發展過程中不會出現工程問題；
Report and transfer the engineering information to direct manager and other departments on time to ensure there is no delay for engineering issue in business development;
15.必要時對其他員工進行技術培訓，知識共享；
Give engineering training to other employees as necessary, knowledge sharing leader in the company;
16.積極參與客戶/第三方審核的準備工作，確保在工程部工作范圍內糾正所有偏差；
Take active part in preparation for customer/third party’s audit, ensure correct all deviation within engineering department work scope;
17.跟蹤客戶工程信息，更新行業/客戶技術標準；
Trace the customer engineering information and industry/customer technical standards updating;
18.根據公司業務要求接受出差和客戶拜訪；
Accept business trip and customer visit based on company business request;
19.靈活安排自己的工作，處理緊急優先事項；
Arrange own work flexible to handle urgent/prioritized matters;
20.能夠滿足JD以外的緊急工作需求和臨時工作分配，并給予生產總監和其他部門充分的工作支持；
Can meet urgent work requirement and temporary work assignments outside of JD, and will give full work support to production director and other departments;
21.必要時與布爾頓其他技術部合作。
Cooperate with engineering department in other Bulten units when necessary.
任職要求：
Professional Profile：
1.機械工程本科及以上學歷；
Mechanical engineering bachelor or above;
2.良好的溝通技巧和抗壓能力；
Good communication skills and ability to work under pressure;
3.至少10年汽車行業技術經驗，有緊固件行業經驗者優先；
Minimum 610years engineering experience in automotive industry, fasteners industry experience is plus;
4.流利的英語聽說讀寫能力；
Fluent English both in writing and oral.
5.熟練使用AutoCAD和MS office(word, excel)，數據庫；
Profession at AutoCAD and MS office( word, excel), database;
6.了解機械工程知識，冷鍛知識和計算。
Familiar with mechanical engineering knowledge, cold forging knowledge and calculation.
中環寰慧科技集團股份有限公司
廊谷(北京)新材料科技有限公司
塘沽瓦特斯
振興偉業財稅服務(天津)有限公司
布爾頓緊固件(天津)有限公司