精品一久久_日韩成人激情_av2016天堂网_国产成年片_日日影视_精品国产观看

1、協助工程師制定各工段（鉆孔/laser，電鍍，photo，DES，AOI，層壓，punch，lay－up，SM，Lab等）的工藝方案，并負責進行基礎工藝測試和數據收集； Assist engineers to develop process plan for each section (drilling /laser, electroplating, photo, DES, AOI, lamination, punch, lay-up, SM, Lab, etc.) ,and responsible for basic process testing and data collection; 2、協助工程師完成工藝文件的編寫和完善，保證所負責各工段的正常運行，不斷的提高成品率和工作效率，配合工程師主導各項試驗的實施，報告給相關工程師或主管；; Assist the engineer to establish the process documents, ensure the good operation of the process, constantly improve the yield and the working efficiency, Supporting engineer to lead the test implementation, report to related engineer or supervisor; 3、負責對信息化內容測試驗證，進行數據收集，并確認效果； Responsible for information content testing and verification, data receipt, and confirm the effect; 4、負責對技術員進行WI規范指導的培訓，并確認培訓效果； Responsible for the WI standard guidance training for technicians,and confirm the training effect; 5、針對成品率的提高和成本的降低，配合工程師組織和實施相應工段的改善措施； Support engineer to reduce operation cost through organization and implementation of the corresponding process improvement,support engineer to improve the yield improve ; 6、帶領技術員監督稽核生產部門標準化作業，并隨時糾正，同時要防止工藝問題而影響生產； Lead the technician to supervise and check the standardization work of the production department, correct the wrong operation anywhere/anytime, Prevent any process problems to impact the production shipment or schedule; 7、配合工程師負責新設備的調試和驗收 。 Support engineer for new equipment trial run and make final acceptance. 要求： 1、本科及以上學歷（濕工藝需化學、化工、機械類相關專業，干工藝需機械、電子、自動化類相關專業），有經驗者可適當放寬學歷要求； Bachelor degree or above (wet process requires chemistry, chemical engineering, mechanical related majors, dry process requires mechanical, electronic, automation related majors),Those with experience may relax the educational requirements appropriately; 2、具備Flex工藝2年或PCB3年以上技術經歷； More than 2 years of Flex process or PCB3 technical experience; 3、了解ISO9001或IATF 16949 程序，F(xiàn)MEA，控制計劃，SPC，DOE；了解有害物質管理； Knowledge of ISO9001 or IATF 16949 procedures, FMEA, control plan, SPC, DOE;Well understanding with HSM; 4、能閱讀英文資料，辦公軟件技能要求：熟悉Excel, Word,PowerPoint； Can read English materials, office software skills: familiar with Excel, Word,PowerPoint; 5、具有良好的團隊合作精神及溝通能力；為人誠實、細心、認真、勤奮、敬業、有責任心、抗壓能力強。 Good team spirit and communication skills; Be honest, careful, conscientious, diligent, dedicated, responsible, and have a strong ability to work under pressure.