要求:
1. Well experienced in vehicle architecture and system
2. Well experienced in vehicle acoustic and vibration intake and exhuast system and combutstion engine development and tests.
3. Well experienced in Headacoutics software test and analysis.
4. Have solid knowledge about acoustic and vibration engineering
5. Skilled in MS Project, MS PowerPoint, MS Excel, MS Word and other project management related tools
6. over 3 years’ experience in acoustic and vibration development field and automotive industry
7. C1 driving license and over 3 years of driving experience
8. Good at english speaking.
1. 在車輛架構和系統方面經驗豐富
2. 在車輛聲學和振動、進氣和排氣系統以及內燃機的開發和測試方面經驗豐富。
3. 在 Headacoutics 軟件測試與分析方面經驗豐富。
4. 具備扎實的聲學與振動工程方面的知識
5. 熟練掌握 MS Project、MS PowerPoint、MS Excel、MS Word 及其他項目管理相關工具
6. 在聲學與振動開發領域以及汽車行業擁有超過 3 年的工作經驗
7. C1 駕駛證及 3 年以上駕駛經驗
8. 擅長英語口語。
Responsibility:
1. Carry out intake and exhuast and combustion engine NVH development and test according to VW group procedures;
2. Analyze benchmark results and propose for new platform design and to discuss them with his/her partners;
3. To inform and to escalate failures or deviations in the test programs or test results and solve the failure in timely;
4. To participate in meetings with areas of R&D to define development programs, timings, amount of samples, to give input for product improvement, etc.
5. To verify and to reproduce failures and findings reported by the stations and test drives in the car, in order to fully understand the nature of the findings.
6. To report, inform, and eventually escalate failures and findings from the acoustic engineering judgement or test.
責任:
1. 按照大眾集團的程序開展進氣、排氣和內燃機 NVH 開發及測試;
2. 分析基準測試結果,為新平臺設計提出建議,并與合作伙伴進行討論;
3. 及時通報并上報測試程序或測試結果中的故障或偏差,并及時解決故障;
4. 參與與研發部門的會議,以確定開發項目、時間安排、樣品數量等,并為產品改進提供意見。
5. 為了驗證并重現各站點及試駕中報告的車輛故障和發現的問題,以便全面了解問題的本質。
6. 報告、通報并最終將聲學工程判斷或測試中出現的故障及發現的情況進行升級處理。